真空泵 / EJ-BA
EJ-BA-MEDIUMX2
• 非常适合分散应用
• 吸气流速和压缩空气消耗量之间的比率高
• 可以集成在夹持点附近,质量轻
• G3/8' 真空端口
• 辅助真空端口,用于 G1/8' 系统的可能吹扫或监控
• 提供双级和三级 EJ-MEDIUM 盒(EJ-LP、EJ-HF 和 EJ-HV)
应用示例
典型应用
• 搬运密封件,如玻璃和金属部件 (EJ-HV)
• 包装(装箱机、纸箱包装机)(EJ-HF、EJ-LP)
• 塑料(模塑)
• 自动、
双钳口自动校准中心的斜口气动夹具,DD系列• 传感器位于后部位置以及抓持区域占用空间更小的新理念。
• 可选磁性传感器 (1)。
• 只有在抓持物品时,传感器才打开。
• 带有弹簧开口的单动式驱动器。
• 高抓持力。
• 配有几个安装附件 (2)。
• 钢质颚式钳。
• FDA-H1 食品级润滑脂。
• 防止进入微小异物 (3)。
• 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper, series DD
• New concept with retracted sensor and smaller dimensi0ns in
the grip area.
• Optional magnetic sensors (1).
• The sensor is ON only when something is gripped.
• Single acting with spring opening.
• Very high closing force.
• Several mounting accessories (2).
• Steel jaws.
• FDA-H1 food-grade grease.
• Protection against the entry of small foreign bodies (3).
• Heavy-duty end-strokes.
传感器
磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此,大量的磁性材料和强烈的磁场可能会造成传感问题。
The operating position is detected by proximity magnetic sensors
(optional) through a magnet p1aced on the piston.
Therefore, avoid using the gripper in the vicinity of intense
magnetic ffelds or near a large mass of ferromagnetic material
as this may cause detection errors.
以上信息由专业从事机械旋转装置的吉玛泰克于2024/5/2 13:15:20发布
转载请注明来源:http://szhou.mf1288.com/jmtkzdh-2745849083.html